SLA Sealed Lead Acid Battery Charging , 12v 2.0ah Alarm System
Designed life for floating charge is 3~5 years (20℃);
AGM valve regulated sealing technology;
Wide temperature scope of application (-15~45℃);
Best temperature of application (20±5℃);
Multipurpose: Float or Cyclic use
High strength ABS material for container & lid;
Standing or lying down for using, convenient to transport and
High sealed reaction efficiency, little loss of water, no need to
water or electrolyte, simple to use and maintain;
Low self-discharge rate.
|Nominal Voltage||12V||Capacity||C20||2Ah (10.5V, at 25℃)|
|Nominal Capacity (C20)||2Ah (10.5V,at 25℃)||C10||1.8Ah (10.5V, at 25℃)|
|Dimension||Length 178mm||C3||1.5Ah (10.5V, at 25℃)|
|Width 35mm||C1||1.2Ah(10.2V, at 25℃)|
|Height 60mm||Internal Resistance||Approx. 60 mΩ (25℃)|
|Total Height 67mm||Max Short-duration Discharge Current||60A(25℃)|
Uninterruptable Power Supply (UPS)
Fire alarm and security systems
Electronic test equipment
Electronic measuring devices
The unique construction and sealing techniques ensure no
from case or terminals.
Electrolyte Suspension System
All batteries utilize an electrolyte suspension system consisting
of a high
porosity, glass fiber material which in conjunction with plates,
totally absorb and
contain the electrolyte.
CGB batteries incorporate a built-in design that controls gas
induces recombination of more than 99% of gases generated during
Maintenance Free Operation
There is no need to check specific gravity of the electrolyte or
add water to
batteries during float service life. In fact, there is no provision
for this type of
Low Pressure Valve Regulated System..
All batteries are equipped with safety release valves, designed to
between 1.5 and 6 psi (10-40kPa) and automatically reseal. Hence,
never an excessive accumulation of gas within the battery.
Heavy Duty Grids
Heavy duty lead calcium tin alloy grids provide an extra margin of
and service life in either float or cyclic applications.
Cyclic Service Life
More than 600 discharge/recharge cycles can be realized from CGB CB
batteries, dependent on the average depth of discharge.
Float Service Life
SE and CB, HR Series batteries have an expected life span of 3 to 5
float service applications.
Self Discharge - Shelf Life
The self discharge rate at room temperature is approximately 3% of
capacity per month.
CGB Batteries may be operated over a broad range of ambient
The batteries are manufactured using a range of terminals which
vary in size
and type. Please refer to details as shown
Don’t near the hot source and don’t under the sunshine.
Don’t charge in the sealed container.
No short circuit. It should be addition charge if you don’t use,
and single charge
per three months, to avoid irreversible sulfating. The battery
should be changed
when the battery jar broken or the electrolyte omitted, to avoid
Don’t store in the space of acid gas.
You should be careful and regular check when use the battery. To
battery don’t work. You should change the battery if the capacity
is not full or has
been damage, especially after one year using.
Don’t put the battery in the fire, or it will explode.
Please use cotton cloth to clean, if the battery is broken down and
electrolyte. Please wash your skin when touch the electrolyte.
Don’t clean the battery by using the organic solution. (e.g.
ging time: 15~20h; Temperature compensation coefficient: