High Stannic Alloy Solar System Gel Battery 12v , Gel Electrolyt
Designed life is 5~8 years (20℃);
High tin alloy, imported colloid electrolyte and special lead
Wide temperature scope of application (-30~45℃);
Best temperature of application (20±5℃);
No leaking, safe and reliable;
Standing or lying down for using, convenient to transport and
Good performance on long-term insufficient charge and frequency
The battery with unique waterproof technical treatment cables
ensure the stable
operation of solar street lamp products.
Low self-discharge rate.
|Nominal Voltage||12V||Capacity||C10||40Ah(10.8V,at 25℃)|
|Nominal Capacity (C10)||40Ah(10.8V,at 25℃)|
|Dimension||Length 197mm||C120||48Ah(11.1V,at 25℃)|
|Height 176mm||Internal Resistance||Approx. 8 mΩ (25℃)|
|Total Height 176mm||Max Short-duration Discharge Current||800A(25℃)|
|Weight||Approx. 14.5kg||Terminal||Cable of φ4mm|
Feature & Advantage
1.The battery is full of power when it’s out of factory, no need to
2.no memory, no need to discharge battery use, suitable for circuit
3.by high partition, adsorption and strong.
4.there is no flowing liquid (poor liquid), does not leak acid and
5.comply with environmental requirements, ease of use.
6.the use of lead-calcium alloys, battery self-discharge is very
7.easy storage, less maintenance.
8.using ABS plastic shell and valve technology for safe use.
Banks & Financial Centre
Hospital& Testing Laboratories
Emergency Power System
Alarm & Security system
High Power Backup Supply
Batteries should be stored in dry and clean warehouse which has
Batteries should avoid direct sunlight. Batteries should not be
near to heat
(such as radiator, the distance should more than 1m).
Batteries should avoid any toxic gas and organic solvent.
Batteries should be recharged within the storage life or before