12V65AH 6-CNF-65B ABS V0 Plastic Frequent discharge For Solar Wind
1.Using oxygen recombination technology: maintenance-free
2.PbCaSn alloy for plate grids: less gassing, less self-discharging
3.High quality AGM separator: extend cycle life and prevent micro
4.ABS material: increase the strength of battery container.
5.High purity raw material: ensure low self discharge rate
6.Silver-coated copper terminals (T1, T2 terminal), brass insert
lead terminals improve theelectric conductivity
|Nominal Voltage||12V||Capacity||C10||65Ah(10.8V,at 25℃)|
|Nominal Capacity (C10)||65Ah(10.8V,at 25℃)|
|Dimension||Length 350mm||C120||78Ah(11.1V,at 25℃)|
|Height 174mm||Internal Resistance||Approx. 7 mΩ (25℃)|
|Total Height 174mm||Max Short-duration Discharge Current||1300A(25℃)|
Positive plate – Thick high Sn low Ca grid with high density paste
Negative plate – Over designed capacity to overcome sulphation at
Separator – Advanced AGM separator
Electrolyte – Dilute high purity sulphuric acid with nano gel
Battery container and cover – ABS
Pillar seal – 100% factory tested, proven two layers epoxy resin
Relief valve – Complete with integrated flame arrestor
Portable VTR/TV, tape recorders, radio, etc.
Power tools, lawn mowers, vacuum cleaners
Cameras and photographic equipment
Portable personal computers, word processors, portable terminals,
Portable measuring equipment
Portable telephone sets
Various power toys and hobby equipment
Communications and electric equipment
Emergency lighting equipment
Fire alarm and security systems
Don’t charge in the sealed container.
Please use cotton cloth to clean, if the battery is broken down and
electrolyte. Please wash your skin when touch the electrolyte.
You should be careful and regular check when use the battery. To
battery don’t work. You should change the battery if the capacity
is not full or has
been damage, especially after one year using.
Don’t put the battery in the fire, or it will explode.